openEHR logo

Base Types

Issuer: openEHR Specification Program

Release: BASE Release-1.0.4

Status: STABLE

Revision: [latest_issue]

Date: [latest_issue_date]

Keywords: openehr, identifiers, types
openEHR components
© 2016 - 2022 The openEHR Foundation

The openEHR Foundation is an independent, non-profit foundation, facilitating the sharing of health records by consumers and clinicians via open specifications, clinical models and open platform implementations.

Licence

image Creative Commons Attribution-NoDerivs 3.0 Unported. https://creativecommons.org/licenses/by-nd/3.0/

Support

Issues: Problem Reports
Web: specifications.openEHR.org

Amendment Record

Issue Details Raiser Completed

R E L E A S E     1.1.0

1.0.0

SPECPUB-6. Correct UML package nesting and paths in documents; insert base parent package.

T Beale

27 Nov 2017

SPECBASE-7. Add Base Types specification to BASE component.

T Beale

02 Sep 2017

0.7.0

Initial Writing; split out from Foundation Types. Taken from openEHR RM Release 1.0.3 Support Model

T Beale

17 Aug 2017

The Amendment history relevant to the original content in this specification can be found here (a fully hyper-linked version may be found on the working baseline).

Acknowledgements

Contributors

This specification has benefited from formal and informal input from the openEHR and wider health informatics community.

Trademarks

  • 'openEHR' is a registered trademark of the openEHR Foundation

1. Preface

1.1. Purpose

This document describes the openEHR Base Types, a collection of general types used by other openEHR specifications.

The intended audience includes:

  • Standards bodies producing health informatics standards;

  • Research groups using openEHR, ISO 13606, archetypes and related technologies;

  • The open source healthcare community;

  • Solution vendors.

1.2. Related Documents

Prerequisite documents for reading this document include:

1.3. Status

This specification is in the STABLE state. The development version of this document can be found at https://specifications.openehr.org/releases/BASE/Release-1.0.4/base_types.html.

Known omissions or questions are indicated in the text with a 'to be determined' paragraph, as follows:

TBD: (example To Be Determined paragraph)

1.4. Feedback

Feedback may be provided on the technical mailing list.

Issues may be raised on the specifications Problem Report tracker.

To see changes made due to previously reported issues, see the BASE component Change Request tracker.

1.5. Previous Versions

This specification is based on the types orginally defined in the openEHR Support Information Model from Release 1.0.3 of the Reference Model.

2. Overview

The openEHR Base Types (org.openehr.base_types package) consists of basic types used globally throughout the openEHR components and specifications, including definitions, various enumerations, identifier types and terminology-related types. The latter two categories are intended to support all kinds of references (to terminology terms, informational objects, real world entities).

The package structure is illustrated below.

BASE base types packages
Figure 1. base.base_types Package

3. Definitions Package

3.1. Overview

The base_types.definitions package shown below defines symbolic definitions used by the openEHR models.

BASE base types.definitions
Figure 2. base.base_types.definitions package

3.2. Class Definitions

3.2.1. BASIC_DEFINITIONS Class

Class

BASIC_DEFINITIONS

Description

Defines globally used constant values.

Constants

Signature

Meaning

1..1

CR: char = '\015'

Carriage return character.

1..1

LF: char = '\012'

Line feed character.

1..1

Any_type: String = "Any"

1..1

Regex_any_pattern: String = ".*"

1..1

Default_encoding: String = "UTF-8"

3.2.2. OPENEHR_DEFINITIONS Class

Class

OPENEHR_DEFINITIONS

Description

Inheritance class to provide access to constants defined in other packages.

Inherit

BASIC_DEFINITIONS

Attributes

Signature

Meaning

1..1

Local_terminology_id: String
{default = "local"}

Predefined terminology identifier to indicate it is local to the knowledge resource in which it occurs, e.g. an archetype

3.2.3. VALIDITY_KIND Enumeration

Enumeration

VALIDITY_KIND

Description

An enumeration of three values that may commonly occur in constraint models.

Use as the type of any attribute within this model, which expresses constraint on some attribute in a class in a reference model. For example to indicate validity of Date/Time fields.

Attributes

Signature

Meaning

mandatory

Constant to indicate mandatory presence of something.

optional

Constant to indicate optional presence of something.

prohibited

Constant to indicate disallowed presence of something.

3.2.4. VERSION_STATUS Enumeration

Enumeration

VERSION_STATUS

Description

Status of a versioned artefact, as one of a number of possible values: uncontrolled, prerelease, release, build.

Attributes

Signature

Meaning

alpha

Value representing a version which is 'unstable', i.e. contains an unknown size of change with respect to its base version. Rendered with the build number as a string in the form N.M.P-alpha.B e.g. 2.0.1-alpha.154.

beta

Value representing a version which is 'beta', i.e. contains an unknown but reducing size of change with respect to its base version. Rendered with the build number as a string in the form N.M.P-beta.B e.g. 2.0.1-beta.154.

release_candidate

Value representing a version which is 'release candidate', i.e. contains only patch-level changes on the base version. Rendered as a string as N.M.P-rc.B e.g. 2.0.1-rc.27.

released

Value representing a version which is 'released', i.e. is the definitive base version. Rendered with the build number as a string in the form N.M.P e.g. 2.0.1.

build

Value representing a version which is a build of the current base release. Rendered with the build number as a string in the form N.M.P+B e.g. 2.0.1+33.

4. Identification Package

4.1. Overview

The BASE.base_types.identification package describes a model of references and identifiers for information entities and is illustrated below.

BASE base types.identification
Figure 3. base.base_types.identification Package

4.2. Requirements

Identification of entities both in the real world and in information systems is a non-trivial problem. The needs for identification across systems in a health information environment include the following:

  • real world identifiers such as social security numbers, veterans affairs ids etc can be recorded as required by health care facilities, enterprise policies, or legislation;

  • identifiers for informational entities which represent real world entities or processes should be unique;

  • it should be possible to determine if two identifiers refer to information entities that represent the same real world entity, even if instances of the information entities are maintained in different systems;

  • versions or changes to real-world entity-linked informational entities (which may create new information instances) should be accounted for in two ways:

    • it should be possible to tell if two identifiers refer to distinct versions of the same informational entity in the same version tree;

    • it should not be possible to confuse same-named versions of informational entities maintained in multiple systems which purport to represent the same real world entity. E.g. there is no guarantee that two systems' "latest" version of the Person "Dr Jones" is the same.

    • Medico-legal use of information relies on previous states of information being distinguishable from other previous states and the current state.

  • It should be possible for an entity in one system or service (such as the EHR) to refer to an entity in another system or service in such a way that:

    • the target of the reference is easily finable within the shared environment, and

    • the reference does is valid regardless of the physical architecture of servers and applications.

The following subsections describe some of the features and challenges of identification.

4.2.1. Identification of Real World Entities (RWEs)

Real world entities such as people, car engines, invoices, and appointments can all be assigned identifiers. Although many of these are designed to be unique within a jurisdiction, they are often not, due to data entry errors, bad design (ids that are too small or incorporate some non-unique characteristic of the identified entities), bad process (e.g. non-synchronised id issuing points); identity theft (e.g. via theft of documents of proof or hacking). In general, while some real world identifiers (RWIs) are "nearly unique", none can be guaranteed so. It should also be the case that if two RWE identifiers are equal, they refer to the same RWE, but this is often not the case. For practical purposes, RWIs cannot be regarded as computationally safe for making the inferences described here.

4.2.2. Identification of Informational Entities (IEs)

As soon as information systems are used to record facts about RWEs, the situation becomes more complex because of the intangible nature of information. In particular:

  • the same RWE can be represented simultaneously on more than one system ('spatial multiplicity');

  • the same RWE may be represented by more than one "version" of the same IE in a system ('temporal multiplicity').

At first sight, it appears that there can also be purely informational entities, i.e. IEs which do not refer to any RWE, such as books, online-only documents and software. However, as soon as one considers an example it becomes clear that there is always a notional 'definitive' or 'authoritative' (i.e. trusted) version of every such entity. These entities can better be understood as 'virtual RWEs'. Thus it can still be said that multiple IEs may refer to any given RWE.

The underlying reason for the multiplicity of IEs is that 'reality' - time and space - in computer systems is not continuous but discrete, and each 'entity' is in fact just a snapshot of certain attribute values of a RWE, at a point in time, in a particular system. If identifiers are assigned to IEs without regard to versions or duplicates, then no assertion can be made about the identified RWE when two IE ids are compared.

4.2.3. Identification of Versions

The notion of 'versioning' applies only to informational entities, i.e. distinct instances of content each representing a snapshot of some logical entity. Where such instances are stored and managed in versioned containers within a versioning system of some kind, explicit identification of the versions is required. The requirements are discussed in detail in the Common IM, change_control package.

They can be summarised as follows:

  • it must be possible to distinguish two versions of the same logical entity, i.e. know from the identifier if they are the same or different versions of the same thing;

  • it must be possible to distinguish two versions of the same logical entity created in two distinct systems;

  • it must be possible to tell the relationship between the items in a versioned lineage, from the version identifiers.

4.2.4. Referencing of Informational Entities

Within a distributed information environment, there is a need for entities not connected by direct references in the same memory space to be able to refer to each other. There are two competing requirements:

  • that the separation of objects in a distributed computing environment not compromise the semantics of the model;

  • that different types of information can be managed relatively independently; for example EHR and demographic information can be managed by different groups in an organisation or community, each with at least some freedom to change implementation and model details.

4.3. Design

This package models only informational identifiers, i.e. transparent identifiers understood by openEHR or related computational systems. Real World Entity Identifiers such as driver’s license numbers are modelled using the data type DV_IDENTIFIER. This is not to imply that such identifiers are any less systematic or well-managed than the system identifiers defined here, only that from the point of view of openEHR, they have the same status as other informational attributes such as name, address etc of a Person.

A key design decision has been to choose a string representation for all identifiers, with subparts being made available by appropriate functions which perform simple parsing on the string. This ensures that the data representation of identifiers (e.g. in XML) is as small as possible, while not losing object-oriented typing.

4.3.1. Primitive Identifiers

Three kinds of types are defined in this package. The abstract UID type and its subtypes correspond to permanent, computationally reliable, primitive identifiers. Such identifiers are regarded as 'primitive' because they are treated as having no further internal structure, in the sense that part of such an identifier is not in general meaningful. The three subtypes UUID, ISO_OID and INTERNET_ID all have these properties, and are commonly accepted ways of uniquely identifying entities in computer systems. In openEHR (and generally in health informatics) they are usually used as parts of other identifiers.

A consequence of the string representation approach used in these classes is that to set an attribute of type UID from a string value, as would be done when reading from a database, deserialising from XML or another text form, a piece of code that inspects the string structure has to be used in order to decide which of the subtypes of UID it is. This is a safe thing to do, since all three subtypes have mutually exclusive string patterns, and can easily be distinguished.

4.3.2. Composite Identifiers

The OBJECT_ID type and its hierarchy of subtypes define all of the identifier types used within openEHR systems. Most of these have a multi-part structure, and some are 'meaningful' i.e. human readable. The identifier types can be used to represent identifier values that fall into two groups semantically: those defined by openEHR (which may incorporate generic standard identifiers, such as ISO Oids etc) and those defined by external organisations. The groups are as shown in the following table. Identifiers whose form is defined by the HIER_OBJECT_ID type are used both by openEHR and many other organisations.

openEHR-defined identifiers Externally defined identifiers

OBJECT_VERSION_ID

TERMINOLOGY_ID

ARCHEYTPE_ID

GENERIC_ID

HIER_OBJECT_ID

HIER_OBJECT_ID
4.3.2.1. UID-based Identifiers

The abstract type UID_BASED_ID and its two subtypes HIER_OBJECT_ID and OBJECT_VERSION_ID provide respectively, UID-based identifiers for non-versioned and versioned items. The design of the latter subtype is explained in the openEHR Common IM, change_control package.

4.3.2.2. Archetype Identifiers

The ARCHETYPE_ID subtype defines a multi-axial identifier for archetypes, meaning that each identifier instance denotes a single archetype within a multi-dimensional space. The space is can be thought of as 3-dimensional, or as a versioned 2-dimensional space, consisting of the following axes:

  • reference model entity, i.e. target of archetype, defined as:

    • name of model issuer;

    • name of model (there may be more than one from the same issuer);

    • name of concept in model, i.e. class name

  • domain concept;

  • version.

The three outer sections are delimited by '.' characters, while the parts of the first section are delimited by - characters. As with any multi-axial identifier, the underlying principle of an archetype identifier is that all parts of the identifier must be able to be considered immutable. This means that no variable characteristic of an archetype (e.g. accrediting authority, which might change due to later accreditation by another authority, or may be multiple) can be included in its identifier. The explicit inclusion of version as part of the identifier means that two 'versions' of an archetype are actually two distinct archetypes. (The rules for archetype versions, revisions and other variants are given in the openEHR Archetype Identification specification.)

Examples of archetype identifiers include:

  • openEHR-EHR-SECTION.physical_examination.v2

  • openEHR-EHR-SECTION.physical_examination-prenatal.v1

  • Hl7-RIM-Act.progress_note.v1

  • openEHR-EHR-OBSERVATION.progress_note-naturopathy.v2

The grammar of archetype identifiers is given below in Section 4.5.

Warning
 some archetype authoring tools have historically allowed a nonconforming version part within archetype identifiers which included the lifecycle status. This has led to some archetypes having an identifier whose version part is of the form .v1draft or similar. The openEHR Foundation will publish guidelines and a timeline on its website for dealing with this problem. New and existing archetype tools may have to support this exception, depending on where they are to be used, and it is recommended that it at least be supported via a command line switch or option. Where such non-conforming archetypes are re-used within a new environment, the identifier should be corrected.
4.3.2.3. Terminology Identifiers

The TERMINOLOGY_ID subtype defines a globally unique single string identifier for terminologies. Terminology identifier values may include a version, either as part of the name, and/or according to the syntax defined in section 4.3.12 below. Examples of terminology identifiers include:

  • "SNOMED-CT"

  • "ICD9(1999)"

Currently the best authoritative source for the name part of the identifier (i.e. the part excluding the optional version part in parentheses) is the US National Library of Medicine UMLS identifiers for included terminologies.

The scheme defined by the TERMINOLOGY_ID class provides for the situation where major 'versions' of a terminology such as the World Health Organisation’s 'ICD10' and 'ICD10AM' (AM = 'Australian modifications') can accommodate a finer grain of versioning or revisioning, e.g.:

  • "ICD10AM(3rd_ed)"

  • "ICD10AM(4th_ed)"

The version part of a terminology identifier is in theory only absolutely necessary for those terminologies which break the rule that the concept being identified with a code loses or changes its meaning over versions of the terminology. This should not be the case for modern terminologies and ontologies, particularly those designed since the publication of Cimino’s 'desiderata' [Cimino_1997] of which the principle of 'concept permanance' is applicable here - "A concept’s meaning cannot change and it cannot be deleted from the vocabulary". However, there may be older terminologies, or specialised terminologies which may not have obeyed these rules, but which are still used; version ids should always be used for these. At a practical level, versions may be included routinely in some systems to support the potential medico-legal need to prove that a) a given code was in fact defined in the terminology (it may not have existed in an earlier edition) and b) that the meaning assmued in the system was indeed the one assigned to it in the particular version or edition.

4.3.2.4. Equivalence

Although there are anomalies in some published terminologies and between some versions or editions of the same terminology, two terminology identifiers that are the same, disregarding the version part, can usually be considered as semantic equivalents in the terminology world. However, depending on which source of strings have been chosen for the name part of the identifier, two different identifiers may also indicate the same terminology, e.g. "ICD10AM_2000" (NLM identifier used in UMLS) and "ICD10AM(2nd_ed)" refer to the same thing.

4.3.2.5. Identifying Versions within openEHR Versioned Containers

The OBJECT_VERSION_ID defines the semantics of the scheme used in openEHR for identifying versions within a versioned container, and uses a three-part identifier, consisting of:

  • object_id: the identifier of the version container, in the form of an UID;

  • version_tree_id: the location in the version tree, as a 1- or 3-part numeric identifier, where the latter variant expresses branching; this is modelled using the VERSION_TREE_ID type;

  • creating_system_id: the identifier of the system in which this version was created, or type UID.

Under this scheme, multiple versions in the same container all have the same value for object_id, while their location in the version tree is given by the combination of the version tree identifier and the identifier of the creating system.

The requirements on the third part of the identifier are that it be unique per system, and that it be easy to obtain or generate. It is also helpful if it is a meaningful identifier. The two most practical candidates appear to be GUIDs (which are not meaningful, but are easy to generate) and reverse internet domain identifiers, as recommended in [3] (these are easy to determine if the system has an internet address, and are meaningful and directly processible, however unconnected systems pose a problem). ISO Oids might also be used. All of these identifier types are accommodated via the use of UID. A full explanation of the version identification scheme and its capabilities is given in the Common IM, change_control package.

4.3.2.6. Generic and External Identifiers

The GENERIC_ID type provides for identifiers of schemes other than defined concretely in the BASE.base_types.identification package. It has a single method scheme, which may be used to record the identifier type. The names of schemes are not currently controlled.

4.3.2.7. Hierarchical Identifiers

The HIER_OBJECT_ID type is defined to support hierarchical identifiers, often based on ISO Oids or other similar machine-readable and -resolvable schemes.

4.3.2.8. Composite Identifiers and Case

All composite identifiers should follow two rules with regard to case, namely:

  • to be case-preserving - not change case due to persistence, copying, transfer or other computation processes;

  • to be case-insensitive - two identifiers identical apart from case are considered to be identical, and therefore to identify the same thing.

The practical consequences of these rules are as follows:

  • mixed-case identifiers may be used, such as archetype identifiers, mixed-case reverse domain identifiers (the INTERNET_ID type);

  • the original case chosen in the letters of identifiers on creation within an openEHR system should be as published by the relevant issuing organisation (e.g. NLM UMLS terminology names are all upper case);

  • if identifiers are used as part of filenames within computer file systems, care must be taken to create and preserve filenames correctly. For this reason, software usually has to handle filename creation and modification differently on Unix-style operating systems, which are case-sensitive (and therefore case-preserving), and Windows-style operating systems, which are case-insensitive but usually case-preserving.

These rules do not apply to any identifier constructed in a language in which case does not exist as a concept. For this reason, for identifiers translated in and out of the Turkish language (and possibly in smaller related languages), care must be taken with the 'I/i' characters.

4.3.2.9. Composite Identifiers and Language

In all of the 'meaningful' identifier types above, with the posible exception of GENERIC_ID, the human-readable identifier sections are assumed to use only the basic latin character set, possibly with the addition of other special characters as allowed by the production rules defined below for each identifier. In most cases, the textual parts of these identifiers will be words from the English language, or else they will be recognisable words from other languages, where necessary alliterated into the latin alphabet. Accented and other diacritical letter variants are not allowed. This limitation is made in the interests of practical computability of identifiers, and is in common with class and attribute naming in shared UML models in the standards world, and also with internet domain names and internet URIs.

4.3.3. References

All OBJECT_IDs are used as identifier attributes within the thing they identify, in the same way as a database primary key. To refer to an identified object from another object, an instance of the class OBJECT_REF should generally be used, in the same way as a database foreign key. The class OBJECT_REF is provided as a means of distributed referencing, and includes the object namespace (typically 1:1 with some service, such as "terminology") and type. The general principle of object references is to be able to refer to an object available in a particular namespace or service. Usually they are used to refer to objects in other services, such as a demographic entity from within an EHR, but they may be used to refer to local objects as well. The type may be the concrete type of the referred-to object (e.g. "GP") or any proper ancestor (e.g. PARTY).

4.4. Class Descriptions

4.4.1. UID Class

Class

UID (abstract)

Description

Abstract parent of classes representing unique identifiers which identify information entities in a durable way. UIDs only ever identify one IE in time or space and are never re-used.

Attributes

Signature

Meaning

1..1

value: String

The value of the id. The value of the id.

Invariants

Value_valid: not value.empty

4.4.2. ISO_OID Class

Class

ISO_OID

Description

Model of ISO’s Object Identifier (oid) as defined by the standard ISO/IEC 8824. Oids are formed from integers separated by dots. Each non-leaf node in an Oid starting from the left corresponds to an assigning authority, and identifies that authority’s namespace, inside which the remaining part of the identifier is locally unique.

Inherit

UID

4.4.3. UUID Class

Class

UUID

Description

Model of the DCE Universal Unique Identifier or UUID which takes the form of hexadecimal integers separated by hyphens, following the pattern 8-4-4-4-12 as defined by the Open Group, CDE 1.1 Remote Procedure Call specification, Appendix A. Also known as a GUID.

Inherit

UID

4.4.4. INTERNET_ID Class

Class

INTERNET_ID

Description

Model of a reverse internet domain, as used to uniquely identify an internet domain. In the form of a dot-separated string in the reverse order of a domain name, specified by IETF RFC 1034 (http://www.ietf.org/rfc/rfc1034.txt).

Inherit

UID

4.4.5. OBJECT_ID Class

Class

OBJECT_ID (abstract)

Description

Ancestor class of identifiers of informational objects. Ids may be completely meaningless, in which case their only job is to refer to something, or may carry some information to do with the identified object.

Object ids are used inside an object to identify that object. To identify another object in another service, use an OBJECT_REF, or else use a UID for local objects identified by UID. If none of the subtypes is suitable, direct instances of this class may be used.

Attributes

Signature

Meaning

1..1

value: String

The value of the id in the form defined below.

4.4.6. UID_BASED_ID Class

Class

UID_BASED_ID (abstract)

Description

Abstract model of UID-based identifiers consisting of a root part and an optional extension;

lexical form: root '::' extension.

Inherit

OBJECT_ID

Functions

Signature

Meaning

1..1

root (): UID

The identifier of the conceptual namespace in which the object exists, within the identification scheme. Returns the part to the left of the first '::' separator, if any, or else the whole string.

1..1

extension (): String

Optional local identifier of the object within the context of the root identifier. Returns the part to the right of the first ::' separator if any, or else any empty String.

1..1

has_extension (): Boolean

True if extension /= Void.

Invariants

Has_extension_valid: extension.is_empty xor has_extension

4.4.7. HIER_OBJECT_ID Class

Class

HIER_OBJECT_ID

Description

Concrete type corresponding to hierarchical identifiers of the form defined by UID_BASED_ID.

Inherit

UID_BASED_ID

4.4.8. OBJECT_VERSION_ID Class

Class

OBJECT_VERSION_ID

Description

Globally unique identifier for one version of a versioned object; lexical form: object_id '::' creating_system_id '::' version_tree_id.

Inherit

UID_BASED_ID

Functions

Signature

Meaning

1..1

object_id (): UID

Unique identifier for logical object of which this identifier identifies one version; normally the object_id will be the unique identifier of the version container containing the version referred to by this OBJECT_VERSION_ID instance.

1..1

version_tree_id (): VERSION_TREE_ID

Tree identifier of this version with respect to other versions in the same version tree, as either 1 or 3 part dot-separated numbers, e.g. 1 , 2.1.4 .

1..1

creating_system_id (): UID

Identifier of the system that created the Version corresponding to this Object version id.

1..1

is_branch (): Boolean

True if this version identifier represents a branch.

4.4.9. VERSION_TREE_ID Class

Class

VERSION_TREE_ID

Description

Version tree identifier for one version. Lexical form:

trunk_version [ '.' branch_number '.' branch_version ]

Attributes

Signature

Meaning

1..1

value: String

String form of this identifier.

Functions

Signature

Meaning

1..1

trunk_version (): String

Trunk version number; numbering starts at 1.

1..1

is_branch (): Boolean

True if this version identifier represents a branch, i.e. has branch_number and branch_version parts.

1..1

branch_number (): String

Number of branch from the trunk point; numbering starts at 1.

1..1

branch_version (): String

Version of the branch; numbering starts at 1.

Invariants

Value_valid: not value.is_empty

Trunk_version_valid: trunk_version /= Void and then trunk_version.is_integer and then trunk_version.as_integer >= 1

Branch_number_valid: branch_number /= Void implies branch_number.is_integer and then branch_number.as_integer >= 1

Branch_version_valid: branch_version /= Void implies branch_version.is_integer and then branch_version.as_integer >= 1

Branch_validity: (branch_number = Void and branch_version = Void ) xor (branch_number /= Void and branch_version /= Void )

Is_branch_validity: is_branch xor branch_number = Void

Is_first_validity: not is_first xor trunk_version.is_equal(“1”)

4.4.10. ARCHETYPE_ID Class

Class

ARCHETYPE_ID

Description

Identifier for archetypes. Ideally these would identify globally unique archetypes. Lexical form: rm_originator '-' rm_name '-' rm_entity '.' concept_name { '-' specialisation }* '.v' number.

Inherit

OBJECT_ID

Functions

Signature

Meaning

1..1

qualified_rm_entity (): String

Globally qualified reference model entity, e.g. openehr-composition-OBSERVATION.

1..1

domain_concept (): String

Name of the concept represented by this archetype, including specialisation, e.g. Biochemistry_result-cholesterol .

1..1

rm_originator (): String

Organisation originating the reference model on which this archetype is based, e.g. openehr , cen , hl7 .

1..1

rm_name (): String

Name of the reference model, e.g. rim, ehr_rm, en13606 .

1..1

rm_entity (): String

Name of the ontological level within the reference model to which this archetype is targeted, e.g. for openEHR, folder , composition , section , entry .

1..1

specialisation (): String

Name of specialisation of concept, if this archetype is a specialisation of another archetype, e.g. cholesterol .

1..1

version_id (): String

Version of this archetype.

4.4.11. TEMPLATE_ID Class

Class

TEMPLATE_ID

Description

Identifier for templates. Lexical form to be determined.

Inherit

OBJECT_ID

4.4.12. TERMINOLOGY_ID Class

Class

TERMINOLOGY_ID

Description

Identifier for terminologies such as accessed via a terminology query service. In this class, the value attribute identifies the Terminology in the terminology service, e.g. SNOMED-CT . A terminology is assumed to be in a particular language, which must be explicitly specified.

The value if the id attribute is the precise terminology id identifier, including actual release (i.e. actual version), local modifications etc; e.g. ICPC2.

Lexical form: name [ (' version )' ].

Inherit

OBJECT_ID

Functions

Signature

Meaning

1..1

name (): String

Return the terminology id (which includes the version in some cases). Distinct names correspond to distinct (i.e. non-compatible) terminologies. Thus the names ICD10AM and ICD10 refer to distinct terminologies.

1..1

version_id (): String

Version of this terminology, if versioning supported, else the empty string.

4.4.13. GENERIC_ID Class

Class

GENERIC_ID

Description

Generic identifier type for identifiers whose format is otherwise unknown to openEHR. Includes an attribute for naming the identification scheme (which may well be local).

Inherit

OBJECT_ID

Attributes

Signature

Meaning

1..1

scheme: String

Name of the scheme to which this identifier conforms. Ideally this name will be recognisable globally but realistically it may be a local ad hoc scheme whose name is not controlled or standardised in any way.

4.4.14. OBJECT_REF Class

Class

OBJECT_REF

Description

Class describing a reference to another object, which may exist locally or be maintained outside the current namespace, e.g. in another service. Services are usually external, e.g. available in a LAN (including on the same host) or the internet via Corba, SOAP, or some other distributed protocol. However, in small systems they may be part of the same executable as the data containing the Id.

Attributes

Signature

Meaning

1..1

namespace: String

Namespace to which this identifier belongs in the local system context (and possibly in any other openEHR compliant environment) e.g. terminology , demographic . These names are not yet standardised. Legal values for the namespace are:

  • local

  • unknown

  • [a-zA-Z][a-zA-Z0-9_-:/&+?]*

1..1

type: String

Name of the class (concrete or abstract) of object to which this identifier type refers, e.g. PARTY , PERSON , GUIDELINE etc. These class names are from the relevant reference model. The type name ANY can be used to indicate that any type is accepted (e.g. if the type is unknown).

1..1

id: OBJECT_ID

Globally unique id of an object, regardless of where it is stored.

4.4.15. PARTY_REF Class

Class

PARTY_REF

Description

Identifier for parties in a demographic or identity service. There are typically a number of subtypes of the PARTY class, including PERSON, ORGANISATION, etc. Abstract supertypes are allowed if the referenced object is of a type not known by the current implementation of this class (in other words, if the demographic model is changed by the addition of a new PARTY or ACTOR subtypes, valid PARTY_REFs can still be constructed to them).

Inherit

OBJECT_REF

Invariants

Type_validity: type.is_equal(“PERSON”) or type.is_equal(“ORGANISATION”) or type.is_equal(“GROUP”) or type.is_equal(“AGENT”)or type.is_equal(“ROLE”) or type.is_equal(“PARTY”) or type.is_equal(“ACTOR”)

4.4.16. LOCATABLE_REF Class

Class

LOCATABLE_REF

Description

Purpose Reference to a LOCATABLE instance inside the top-level content structure inside a VERSION<T>; the path attribute is applied to the object that VERSION.data points to.

Inherit

OBJECT_REF

Attributes

Signature

Meaning

0..1

path: String

The path to an instance in question, as an absolute path with respect to the object found at VERSION.data. An empty path means that the object referred to by id being specified.

1..1
(redefined)

id: UID_BASED_ID

The identifier of the Version.

Functions

Signature

Meaning

1..1

as_uri (): String

A URI form of the reference, created by concatenating the following: ehr:// + id.value + / + path.

4.5. Syntaxes

The identifiers defined above are defined in their string form by the following EBNF grammar rules.

(* --------------------------- INTERNET_ID --------------------------- *)
(* According to IETF http://tools.ietf.org/html/rfc1034[RFC 1034] and  *)
(* http://tools.ietf.org/html/rfc1035[RFC 1035], as clarified by       *)
(* http://tools.ietf.org/html/rfc2181[RFC 2181] (section 11),          *)
(* the syntax of a domain name follows the grammar:                    *)

domain      = subdomain | ' ' ;
subdomain   = label | subdomain, '.', label ;
label       = letter [ [ ldh-str ] let-dig ] ;
ldh-str     = let-dig-hyp | let-dig-hyp, ldh-str ;
let-dig-hyp = let-dig | '-' ;
let-dig     = letter | digit ;

(* --------------------------- INTERNET_ID --------------------------- *)
internet_id = root [ '::' extension ] ;
root        = uid ;
extension   = ? any string ? ; (* any string *)

(* ------------------------- OBJECT_VERSION_ID ----------------------- *)
object_version_id  = object_id '::' creating_system_id '::' version_tree_id ;
object_id          = uid ;
creating_system_id = uid ;

(* ------------------------- VERSION_TREE_ID ------------------------- *)
version_tree_id = trunk_version [ '.' branch_number '.' branch_version ] ;
trunk_version   = number ;
branch_number   = number ;
branch_version  = number ;

(* ------------------------- UID, OID, GUID -------------------------- *)
uid     = iso_oid | guid ;
iso_oid = number, { '.', number } ;
guid    = hex-number, '-', hex-number, '-', hex-number, '-', hex-number, '-', hex-number ;

(* -------------------------- ARCHETYPE_ID --------------------------- *)
archetype_id        = qualified_rm_entity '.' domain_concept '.' version_id ;
qualified-rm-entity = rm_originator '-' rm_name '-' rm_entity ;
rm-originator       = alphanum-str ;     (* id of org originating the RM on which this archetype is based *)
rm-name             = alphanum-str ;                      (* id of the RM on which the archetype is based *)
rm-entity           = alphanum-str ;                                       (* ontological level in the RM *)
domain-concept      = concept-name { '-' specialisation } ;
concept-name        = alphanum-str ;
specialisation      = alphanum-str ;
version-id          = 'v', non-zero-digit, [ number ] ;                     (* numeric version identifier *)

(* ------------------------- TERMINOLOGY_ID -------------------------- *)
terminology_id = name-str, [ '(', name-str, ')' ] ;

(* -------------------------- generic rules -------------------------- *)
name-str     = letter, { letter | digit | '_' | '-' | '/' | '+' } ;
alphanum-str = letter, { letter | digit | '_' } ;
letter       = 'a' | .. | 'z' | 'A' | .. | 'Z' ;

number         = digit, { digit } ;
hex-number     = hex-digit, { hex-digit } ;
digit          = '0' | nz_digit ;
non-zero-digit = '1' | .. | '9' ;
hex-digit      = '0' | .. | 'A' | .. | 'F' .. | 'a' | .. | 'f' ;

5. Terminology Package

5.1. Overview

One type is provided among the base_types package to represent a reference to a 'terminology code', i.e. a code within a 'terminology'. This is sometimes called a 'concept code' among terminology builders.

The assumption here is that the 'code' is a reference to a referenceable entity within a terminology or ontology, which may be:

  • a single 'term', for which a definition and potentially relationships (at least the IS-A relationship);

  • a 'value set' i.e. a set of single terms, possibly in a tree or other structure corresponding to relationships between the member terms;

  • any other terminological entity referencable with a code.

BASE base types.terminology
Figure 4. base.base_types.terminology package

5.2. Class Definitions

5.2.1. Terminology_term Class

Class

Terminology_term

Description

Leaf type representing a term from a terminology, which consists of the term text and the code, i.e. a concept reference.

Inherit

Any

Attributes

Signature

Meaning

1..1

concept: Terminology_code

Refrence to the terminology concept formally representing this term.

1..1

text: String

Text of term.

5.2.2. Terminology_code Class

Class

Terminology_code

Description

Logically primitive type representing a reference to a terminology concept, in the form of a terminology identifier, optional version, and a code or code string from the terminology.

Inherit

Any

Attributes

Signature

Meaning

1..1

terminology_id: String

The archetype environment namespace identifier used to identify a terminology. Typically a value like "snomed_ct" that is mapped elsewhere to the full URI identifying the terminology.

0..1

terminology_version: String

Optional string value representing terminology version, typically a date or dotted numeric.

1..1

code_string: String

A terminology code or post-coordinated code expression, if supported by the terminology. The code may refer to a single term, a value set consisting of multiple terms, or some other entity representable within the terminology.

0..1

uri: Uri

The URI reference that may be used as a concrete key into a notional terminology service for queries that can obtain the term text, definition, and other associated elements.